To Next PageTo Next Page
Need help?Do you have a question about the Transonic TS420 and is the answer not in the manual?
Describes usage limitations, environmental conditions, and handling for research consoles and modules.
Lists essential electrical safety precautions and operational guidelines for the equipment.
Details the back panel layout, power switch, fuse access, and analog output connections.
Covers module installation, removal, and synchronization procedures for console operation.
Details the front panel layout, buttons, and displays of the TS410 Module.
Details operation modes (Measure, Test, Zero, Scale) and filter settings for flow measurement.
Outlines functional tests for setup and zero offset.
Instructions for initial module setup, sensor connection, and performing flow sensor zero offset.
Guides on adjusting user gain and calibrating data acquisition systems with the TS410.
Explains how to navigate the TS410 module's program menu and settings.
Details the front panel layout, buttons, and displays of the TS420 Module.
Outlines functional tests for setup and signal quality.
Instructions for initial module setup and performing the perivascular flowprobe signal quality test.
Details the front panel layout, mode buttons, calibration buttons, and analog outputs.
Outlines calibration checks and DAQ calibration.
Instructions for checking transducer calibration and calibrating data acquisition systems with the SP430.
Describes usage limitations, environmental conditions, and handling for research consoles and modules.
Lists essential electrical safety precautions and operational guidelines for the equipment.
Details the back panel layout, power switch, fuse access, and analog output connections.
Covers module installation, removal, and synchronization procedures for console operation.
Details the front panel layout, buttons, and displays of the TS410 Module.
Details operation modes (Measure, Test, Zero, Scale) and filter settings for flow measurement.
Outlines functional tests for setup and zero offset.
Instructions for initial module setup, sensor connection, and performing flow sensor zero offset.
Guides on adjusting user gain and calibrating data acquisition systems with the TS410.
Explains how to navigate the TS410 module's program menu and settings.
Details the front panel layout, buttons, and displays of the TS420 Module.
Outlines functional tests for setup and signal quality.
Instructions for initial module setup and performing the perivascular flowprobe signal quality test.
Details the front panel layout, mode buttons, calibration buttons, and analog outputs.
Outlines calibration checks and DAQ calibration.
Instructions for checking transducer calibration and calibrating data acquisition systems with the SP430.
General| Type | Ultrasonic Flow Meter |
|---|---|
| Outputs | 4-20 mA, Pulse, Relay |
| Measurement Principle | Transit Time Difference |
| Communication | RS485 |
| Power Supply | 24 VDC |
| Operating Temperature | -20°C to +60°C |
| Protection Class | IP65 |
