To Next PageTo Next Page
Need help?Do you have a question about the Transonic HT353 and is the answer not in the manual?
Details system usage, electrical safety, EM interference, and patient care guidelines.
Lists compatible flowmeters, their features, and compatibility with FlowTrace® software.
Explains the types of probes and sensors used with the system and their applications.
Step-by-step guide for connecting and powering on the AureFlo® system components.
Guides users through initial system checks and probe connection verification.
Procedure for testing the signal quality and application of perivascular flowprobes.
Procedure for testing the signal quality and application of clamp-on flowsensors.
Guides through initial system setup, patient/surgery input, and launching FlowTrace®.
Describes how to test the probe/sensors for proper acoustic coupling and signal quality.
Explains the real-time display of flow data, waveforms, PI, and ECG signals.
Instructions for starting, stopping, and managing continuous flow data recordings.
Details how to capture and save 8-second flow data snapshots for review or printing.
Steps for setting up, cleaning, and applying perivascular flowprobes during surgery.
Procedure for using clamp-on flowsensors, including cleaning, selection, and lubrication.
Provides a step-by-step protocol for performing flow measurements during CABG surgery.
Step-by-step instructions for assembling the AureFlo® system components.
Guide for installing the FlowTrace® software, including language selection.
Details system usage, electrical safety, EM interference, and patient care guidelines.
Lists compatible flowmeters, their features, and compatibility with FlowTrace® software.
Explains the types of probes and sensors used with the system and their applications.
Step-by-step guide for connecting and powering on the AureFlo® system components.
Guides users through initial system checks and probe connection verification.
Procedure for testing the signal quality and application of perivascular flowprobes.
Procedure for testing the signal quality and application of clamp-on flowsensors.
Guides through initial system setup, patient/surgery input, and launching FlowTrace®.
Describes how to test the probe/sensors for proper acoustic coupling and signal quality.
Explains the real-time display of flow data, waveforms, PI, and ECG signals.
Instructions for starting, stopping, and managing continuous flow data recordings.
Details how to capture and save 8-second flow data snapshots for review or printing.
Steps for setting up, cleaning, and applying perivascular flowprobes during surgery.
Procedure for using clamp-on flowsensors, including cleaning, selection, and lubrication.
Provides a step-by-step protocol for performing flow measurements during CABG surgery.
Step-by-step instructions for assembling the AureFlo® system components.
Guide for installing the FlowTrace® software, including language selection.
General| Brand | Transonic |
|---|---|
| Model | HT353 |
| Category | Industrial Equipment |
| Language | English |
