21
3.2 Software Utility --- iBT-GPS Logger Tool
(To use a mini-USB cable to connect the iBT-GPS to your PC, you have
to power on the iBT-GPS unit. Therefore, you have to switch to LOG)
Note: Please install USB Driver before you use iBT-GPS Logger Tool.
For driver installation, please refer to “3.1 Drivers”.
Step 1.
You have to create and name a folder in your computer to further put
the iBT-GPS logger tool. Please copy the “DataLog.exe” into this
folder.
Step 2.
Click on the icon of the logger tool “DataLog.exe”
Step 3.
See below, four sections will display horizontally on the screen in an
array from left to right as below:
¾ Configuration：
To create settings for connection/ Command setting
¾ Satellite Information：
To view GPS status and perform Hot/ Warm/ Cold Start
¾ Data Log List：
Download of logged data/ Use of Google earth for showing
tracks
To Next Page
Loading...