25
iii. AutoLog Option (Change Recording Interval)：
This is to set the record method.
1. Setting log time interval：Configure log interval between 1~999 sec.
For example, “10 Seconds” stands for iBT-GPS will record one data
every 10 seconds.
2. Setting log distance：Configure log interval between 10~9999 meter(s)
For example, “1000 meters” stands for iBT-GPS will record one data
every 1000 meters.
3. Setting log speed：
Configure log interval between 10~999 km/h. Set speed at the highest
To Next Page
Loading...