Components of the Product
Product Component
Components
Instructions
Charge of the battery
a. When charging the box, a blue flashing light will turn on, and when it has finished charging, it will
switch off.
b. When charging the headphones, please place them inside the box, the charging status will be
activated automatically; during charging there will be a warning light that will flash slowly, when the
charging has finished, the light will turn off.
Connection of the two headphones:
a. First time to connection: take out the two headphones from the box, keep a distance of 10 cm
between the two headphones, within 10 seconds the two headphones will connect, the headphone
lights will flash quickly after which they will flash slowly.
b. Turn on the Bluetooth in your smartphone or other devices with Bluetooth connection, search T3
and click on link. The light will flash quickly then slowly, the connection is successful, you can start
using them.
c. Continually next, activate the Bluetooth on the smartphone or other devices, pull out the
To Next Page
Loading...
