headphones and automatically connect to the Bluetooth of the device.
Connection of a single headset
a. Single use of the right earphone: pull out only the right earphone and connect it following the
instructions of the two headphones connection.
b. Single use of the left earphone: pull out only the left earphone. Once turn off manually, long press to
turn them turn on and enter connection mode and T3 search to connect via Bluetooth.
Methods of use
Methods of use
Proper use method
Where there is the inscription “L” is the left headphone, the writing “R” is the right headphone.
The upper part of the earphones goes inside the ear, fits comfortably in your ear.
If you want to have a greater audio experience, you can try to change them with gel pads. If worn
properly they will be comfortable and firm.
Outdoor Use
The human body contains a lot of water, which could create problems with the Bluetooth connection.
The right earphone is set to receive the cell phone’s Bluetooth signal. We recommend putting the cell
phone in the right pocket, which can effectively avoid the blocking signal of the human body and
improve anti-interference ability during use.
Key function
Music Mode
To Next Page
