TRAPP Master 1000 - Technical Specifications

ENGLISH
24
www.trapp.com.br
Technical Specifications
Model
Engine
Type
Voltage
Rated power
Approx. rotation
Sound level
Weight
Machine length
Width (in the
protection device)
Height (in the
protection device)
Master
1000
Single-phase Universal
127 V or
220 V
850 W 9000 rpm 87 dB (A) 5 kg 1.80 m 34 cm 13 cm
Master
3000
Single-phase
Induction
127/220 V
1/2 hp 3600 rpm 87 dB (A) 8.2 kg 1.80 m 34 cm 13 cm
Three-phase
220 V or
380 V
Table of Accessories
Code Accessory Model Cutting range
2122-264 Nylon spool
Only for Brush Cutter Master 1000
(accompanying the product)
34 cm
1112-601 2-point blade
Brush Cutter Master 1000/3000
(accompanying the product)
1110-542 3-point blade
Brush Cutter Master 1000/3000
(not accompanying the product)
26 cm
1110-473 4-point blade
Brush Cutter Master 1000/3000
(not accompanying the product)
1110-462 8-point blade
Brush Cutter Master 1000/3000
(not accompanying the product)
1110-505 80-point blade
Brush Cutter Master 1000/3000
(not accompanying the product)
Table for the Correct Use of the Extension Cord
Master 1000
Meters 10 m 20 m 30 m 40 m 50 m 60 m 70 m 80 m 90 m
Voltage 110 / 127 Volts
Gauge (Ø) A.W.G
18 16 14 14 14 12 12 12 12
Gauge (Ø) mm
0.75 1.0 1.5 1.5 1.5 2.5 2.5 2.5 2.5
Voltage 220 / 230 Volts
Gauge (Ø) A.W.G
18 18 16 16 16 14 14 14 14
Gauge (Ø) mm
0.75 0.75 1.0 1.0 1.0 1.5 1.5 1.5 1.5