Maintenance and Storage
✔ To get maximum performance, lubricate
the wheels and all points such as pivots
with the motor oil every 25 hours.
✔ To lubricate the motor, refer to the “Motor
Instructions Manual”.
✔ Keep all nuts and screws tight to make
sure the mower is in usage conditions.
✔ Every time grass is mown, remove all the
grass from the base, both on the top as in
bottom of the mower.
Check the cutting blades for:
✔ The use of TRAPP original blades.
✔ The correct sharpening of the cutting area
and for optimum balance.
✔ Proper assembly.
Oil change:
✔ To change the oil, do as described in the
figures below:
ENGLISH
58
Remove the oil plug (5 and 6 hp motor).
Oil change through the upper part of the motor
(3.75 hp motor).
Tilt the lawn mower (5 and 6 hp motor).
To Next Page
Loading...
