ENGLISH
66
✔ If your lawn is very high, avoid
overloading the engine by using only half
of cutter cutting range, as shown below.
Machines with grass-holder - Clockwise sense.
Machines with grass-holder and side outlet -
Anti-clockwise sense
Installing the Grass Catcher
How to assemble the grass catcher:
To assemble the grass catcher, lift the rear
door, hold the grass catcher handle, place it
to operation position (fig. 6) and lower the
rear cover.
Important:
Make sure the hooks on each side of the
grass catcher frame are assembled on
the rear cover shaft.
Figure 6
✔ According to cutter model (with or
without grass-holder, with side outlet), use
a cutting sense as shown in the
illustrations below.
To Next Page
Loading...
