Quick start:
3
Connect the power supply to the camera and
wait one minute before the setup and LED indicator
flashes fast
Download TRASSIR Client application
(You can add the camera only with it)
Run the TRASSIR Client application, enter your username
and password or create new account*
Go to Settings
Add camera
Trassir
Follow the instruction on the page
*
Go to trassircloud.com to create a new account.
Status LED indicator:
• Does not flash if the power supply is absent
• Flashes fast if the camera is available for setup
• Flashes slow if there is no connection to 2.4 GHz Wi-Fi
network
• Shows steady if the camera is already connected to Wi-Fi
network
To Next Page
Loading...