Covers Parts #6590, 8485, 8486, 8487, 8488, 8489
LED Light Bar Kit Installation Instructions
TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070,
Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
KC2619-R05 Rev 190522
Vehicle Body and Body Interior
Removal (Fig. 1):
1. Remove the 3x8mm flat-head screws
(12) from the vehicle body and
remove the body from the chassis.
2. Remove the 3x15mm button-head
screws (4) from both sides of the
center “X” roof support brace and
remove the brace.
3. Remove the 3x15mm button-head
screw, 3x20mm button-head screw,
and 3x30mm button-head screw
from the left side (driver side) of the
tube chassis to allow removal of the
body interior.
4. Remove the 3x8 flat-head screws from
the body interior (4) and remove the
interior from the chassis.
Body modification (Fig. 2 and 3):
If either the front grille LED light bar (#8486) or the rear LED
light bar (#8487) are being installed, the vehicle body will need
modification. Use Lexan® body scissors to cut out the section(s)
as indicated. Templates are provided at the bottom of page 3.
#6590 Kit Contents:
• High-Voltage Power Amplifier
• 3x12mm button-head screws (2)
#8485 Kit Contents:
• High-Voltage Power Amplifier
• Front grille LED light bars (2)
• Rear LED light bar
• Windshield LED light bar
• LED light bar mounts (2)
• 2-in-1 wire harness
• 3x10mm button-head screws (4)
• 3x12mm button-head screws (4)
• 3x15mm button-head screws (4)
• 3x20mm button-head screws (2)
• Zip ties (10)
#8486 Kit Contents:
• Front grille LED light bar
• LED light bar mounts (2)
• 3x10mm button-head screws (2)
• 3x15mm button-head screws (2)
• 3x20mm button-head screws (2)
• Zip ties (3)
#8487 Kit Contents:
• Rear LED light bar
• 3x12mm button-head screws (2)
• Zip ties (4)
#8488 Kit Contents:
• Windshield LED light bar
• 3x15mm button-head screws (2)
• Zip ties (2)
#8489 Kit Contents:
• 2-in-1 wire harness
Visitez Traxxas.com/manuals pour télécharger
les instructions dans votre langue.
Visite la página Traxxas.com/manuals para
descargar el instrucciones en su idioma.
Auf Traxxas.com/manuals, können Sie
anleitung in Ihrer Sprache downloaden.
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x30 BCS
3x15 BCS
3x20 BCS
3x15 BCS
3x15 BCS
3x15 BCS
3x15 BCS
Cut away material
✄
Cut away material
✄
Fig. 2 FRONT REAR
102mm x 28mm
102mm x 18mm
Fig. 1
Fig. 3
Compatible with the following Traxxas
electronic speed controls (sold separately):
Velineon® VXL-6s (part #3485)
Velineon® VXL-8s (part #3496)