Need help?Do you have a question about the Traxxas DRAG SLASH and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| ESC | VXL-3s |
| Shock Length | Long (front), XX-Long (rear) |
| Speed Control Type | Electronic |
| Steering | Bellcrank |
| Motor | Velineon 3500 |
| Wheel Diameter | 2.2 inches |
| Gear Pitch | 48-pitch |
| Radio System | TQi 2.4GHz |
| Drive System | 2WD |
| Differential | Sealed, limited-slip |
| Servo | Waterproof |
| Tires | Drag slicks |
Contacting Traxxas for technical assistance and support options.
Overview of procedures to get your model running quickly.
Instructions for registering your Traxxas product online.
Regulatory information regarding FCC rules for the device.
Explanation of icons for warnings, hints, and cross-references.
Details for contacting Traxxas technical support.
Key guidelines for safe operation and avoiding damage.
Precautions for operating the electronic speed control safely.
Guidance on recycling NiMH batteries.
Critical warning about LiPo batteries and fire risks.
Specific handling and safety instructions for LiPo batteries.
Precautions for charging and handling all battery types.
Further safety guidelines for battery charging and handling.
List of specialty metric tools supplied with the model.
Suggested tools and supplies for an R/C toolbox.
Necessary items for operating and maintaining the model.
Instructions for applying decorative decals to the model.
Definitions of key terms related to the radio and power systems.
Critical safety advice for operating the radio system.
Visual guide illustrating the model's wiring connections.
Description of the TQi transmitter and receiver.
Overview of the VXL-3s ESC features and operation.
Steps for installing batteries into the TQi transmitter.
Recommendations for compatible batteries for the model.
Guidance on choosing the correct charger for batteries.
Details on the Traxxas Battery iD feature for charging.
Instructions for mounting the wheelie bar.
How to fit different battery pack configurations.
Procedures for installing the battery pack into the model.
Explanation of the Traxxas High-Current Connector.
Description of the transmitter's buttons and triggers.
Essential rules for safe radio system operation.
Explanation of the built-in fail-safe function.
Initial adjustments for steering and throttle trim.
Steps for turning the system on and off correctly.
Procedure to ensure proper radio signal range.
Steps to bind the transmitter and receiver.
Overview of the TSM driving assistance system.
Description of available TSM modes, including Drag Race Mode.
Instructions for properly setting up the receiver antenna.
Technical specifications of the VXL-3s electronic speed control.
How to activate/deactivate LVD for battery protection.
Steps to calibrate the ESC with the transmitter.
How to operate the ESC and understand its status lights.
How to select different ESC operating profiles.
Meanings of ESC LED indicators and protection features.
Details on the reduced power Training Mode profile.
Tips for rapidly switching between ESC profiles.
How to operate the integrated transmitter Trans Brake.
Strategies and advice for improving drag racing performance.
Recommended batteries for optimal drag racing performance.
Technique for warming tires to increase grip.
How to change pinion/spur gears for speed tuning.
Setting the wheelie bar for optimal launch stability.
Tips for driving and tuning without stability management.
Essential preparation steps for drag racing.
Making small, incremental adjustments for better handling.
How to adjust suspension for stable launches.
Important safety considerations during operation.
Factors affecting the model's operational run time.
Methods to extend the model's runtime.
How battery capacity (mAh) affects power and speed.
Guidelines for operating the model in wet environments.
Essential precautions when running in wet conditions.
Checks to perform before driving in wet conditions.
Specific care instructions for the motor when wet.
Necessary maintenance after running in wet conditions.
Additional maintenance required after prolonged wet use.
How to ensure the receiver box remains watertight.
Procedures for removing and installing radio components.
Detailed steps for installing the receiver into its box.
How to set toe-in for optimal steering and stability.
How to set camber angle for wheel alignment.
Adjusting shock pistons, oil, and preload for handling.
Details on the stock shock mounting setup.
How to adjust motor and gear ratios for performance.
A chart showing various gear ratio combinations.
Explanation of the fixed gear adapter's purpose.
How to adjust the slipper clutch for traction control.
Procedure to re-center the steering servo.
Information on tuning the sealed differential.
Steps for refilling the differential with oil.
Technical specifications for the Velineon 3500 motor.
Critical instructions for safe LiPo battery use.
How to monitor temperatures to prevent overheating.
How to install an optional temperature sensor.
Details on the optional ESC cooling fan.
Essential checks for damage and wear before operation.
Regular maintenance procedures for optimal performance.
How to check and replace slipper clutch pads.
Keeping the chassis clean and checking for damage.
Maintaining the steering system for proper function.
Cleaning and lubricating the motor bearings.
How to maintain and rebuild the model's shocks.
Inspecting suspension parts for wear or damage.
Checking the driveline for wear and binding.
Proper procedures for storing the model.
Steps to reset the TQi transmitter to factory settings.
Explanation of the Throttle Trim Seek mode.
Tuning steering response using the Multi-Function knob.
Tuning throttle response using the Multi-Function knob.
Adjusting the steering throw percentage.
Adjusting the brake response percentage.
Fine-tuning the throttle's neutral position.
Setting the maximum travel limits for steering and throttle.
Fine-tuning the neutral position of steering and throttle servos.
Disabling the Multi-Function knob to prevent changes.
How knob settings are applied and interact.
Explanation of the built-in failsafe safety feature.
Meanings of the transmitter's LED light patterns.
Meanings of the receiver's LED light patterns.
Managing and storing multiple model profiles.
How to prevent accidental deletion of model memory.
Steps to enable the Model Lock feature.
Procedures for removing old models from memory.
Assigning functions to the Multi-Function knob.
Configuring knob for steering sensitivity control.
Configuring knob for throttle sensitivity control.
Configuring knob for steering percentage control.
Configuring knob for braking percentage control.
Configuring knob for throttle trim control.
Turning off the Multi-Function knob's functionality.
Choosing the mode for the Multi-Function knob.
Overview of Traxxas Link app features.
How to lock and unlock model memory entries.
Restoring the transmitter to its original factory settings.
Visual guide for setting up the Multi-Function knob functions.
How to reverse servo direction for steering and throttle.
Fine-tuning the steering servo's neutral position.
Adjusting the maximum steering travel limits.
Restoring steering end points to factory defaults.
How to reverse throttle servo direction.
Fine-tuning the throttle servo's neutral position.
Adjusting the maximum throttle travel limits.
Restoring throttle end points to factory defaults.
Using mobile devices to program the transmitter.
Overview of the Traxxas Link app's capabilities.
Viewing live telemetry data on the app.
Organizing and managing multiple vehicle profiles.
To Next Page