Need help?Do you have a question about the Traxxas Slash 4x4 Ultimate 6807 and is the answer not in the manual?
General| Brand | Traxxas |
|---|---|
| Model | Slash 4x4 Ultimate 6807 |
| Category | Motorized Toy Car |
| Language | English |
Instructions to read before operating the model to prevent damage.
Explains icons for warnings, tips, and cross-references used throughout the manual.
Overview of procedures to get the model running quickly.
Key safety points for operating the RC model responsibly.
Guidelines for safe handling and charging of rechargeable batteries.
Information on the special care and handling procedures for LiPo batteries.
Precautions related to the electronic speed control and its operation.
Lists the specialty metric tools included with the model.
Lists essential items that need to be purchased separately.
Suggests optional but useful tools for an R/C toolbox.
Overview of the TQ 2.4GHz transmitter and its features.
Explanation of terms related to the radio and power systems.
Crucial safety advice for operating the radio system to maintain signal.
Illustrates the wiring connections between ESC, motor, and battery.
Identifies the controls and features of the TQ 2.4GHz transmitter.
Overall wiring schematic of the model's electronic components.
Details the VXL-3S electronic speed control and its connections.
Steps for installing batteries into the TQ transmitter.
Instructions for charging the included battery pack safely.
Guidance on selecting and using appropriate batteries for the transmitter.
Procedure for securely installing the battery pack into the model.
How to adapt the battery compartment for various battery pack types.
Explanation of the patented connector for optimal power delivery.
Advice on selecting batteries for high-performance power systems.
Identification and function of the transmitter's controls.
Essential rules for safe and proper operation of the TQ radio system.
How to perform basic adjustments like throttle neutral and steering trim.
Description of the built-in fail-safe system for signal loss.
Step-by-step guide for checking radio system operation.
Procedure for testing radio system range before each session.
Steps to electronically bind the transmitter and receiver.
How to adjust steering sensitivity using the Multi-Function knob.
Instructions for correctly positioning and securing the receiver antenna.
Technical specifications for the VXL-3s electronic speed control.
How to set Low-Voltage Detection for LiPo or NiMH batteries.
Steps to calibrate the ESC and transmitter for optimal performance.
How to operate the VXL-3s ESC and understand its LED indicators.
How to select different driving profiles (Sport, Race, Training).
Explains the meaning of different LED light patterns and protection modes.
Factors affecting battery run time and performance.
Strategies to maximize the model's run time.
Guidelines and precautions for operating the model in wet environments.
General precautions to take before and during wet condition operation.
Procedures for cleaning and drying the model after wet use.
Steps to ensure the receiver box remains watertight after maintenance.
How to set the gear mesh correctly to prevent stripped gears.
How to adjust the camber angle for optimal handling.
How to set toe-in for stability and cornering performance.
How to change shock mounting positions for different terrain.
Steps to re-center the steering servo after removal or maintenance.
How to adjust the slipper clutch for tire spin regulation.
Guide to inspecting the model for damage and wear.
Essential periodic checks for slipper clutch pads and chassis.
Procedures for storing the model properly after use.
Steps for removing front and rear suspension modules.
How to adjust camber gain for suspension compression response.
How to adjust roll center for chassis roll characteristics.
How to tune speed and temperatures by changing gear ratios.
Important information for advanced users regarding LiPo battery safety.
Advanced programming options for the VXL-3s ESC.
Information on sensorless motors and their compatibility with VXL-3s.
Information on sensored motors and their compatibility with VXL-3s.
Information on using brushed motors with the VXL-3s ESC.
How to tune differentials by changing oil viscosity.
Steps to access and refill the front differential.
Steps to access and refill the rear differential.
Information on installing and using the optional center differential.
How to tune and maintain the Big Bore shocks.
How to adjust sway bar links for optimal handling.
How to reset the transmitter to factory default settings.
Explanation of the throttle trim seek mode to prevent runaways.
How to adjust throttle sensitivity using the Multi-Function knob.
How to set steering travel percentage using the Multi-Function knob.
How to set independent travel limits for steering and throttle.
Fine-tuning the neutral position of servos using sub-trim.
Explanation of the Traxxas Link feature for model memory.
How to lock a model in memory to prevent accidental deletion.
Explanation of the built-in failsafe system for signal loss.
Table of LED color patterns and their meanings on the transmitter.
Table of LED color patterns and their meanings on the receiver.
Diagram showing navigation through the transmitter's programming menu.
Section for recording front suspension settings.
Section for recording rear suspension settings.
Section for recording front shock settings.
Section for recording rear shock settings.
Section for recording wheel and tire specifications.
Section for recording motor and drivetrain settings.
Section for recording sway bar settings.
Section for noting the model's body type.
Section for noting track surface, traction, and size.
Section for recording the model's weight and balance distribution.
To Next Page