Need help?Do you have a question about the Traxxas E Revo 5608 and is the answer not in the manual?
General| Type | Monster Truck |
|---|---|
| Scale | 1/10 |
| Battery | 7-cell NiMH or 2S LiPo |
| Top Speed | 30+ mph (48+ km/h) |
| Drive System | 4WD |
| Differential Type | Sealed |
| Gear Pitch | 32-Pitch |
| Chassis Structure/Material | Composite |
| Steering | Dual Servo |
| Radio System | TQ 2.4GHz |
| Charger | Not included |
| Servo | 2075 |
| Tires | Talon |
Information on Traxxas support services and an overview of the quick start guide for model setup.
Instructions on registering your model and details regarding FCC compliance regulations.
Essential safety guidelines and warnings for operating the model to prevent injury and damage.
Tips for easier operation and where to find customer support for your model.
Lists of tools and accessories included with the model, necessary for operation, and recommended for hobbyists.
An overview of the Traxxas TQi radio system and definitions of key terms used in the manual.
Instructions and tips for applying the decorative decals to personalize your model.
Critical safety advice and best practices for using the radio system to ensure reliable control.
Details on the components of the radio system, including the transmitter, receiver, and their connections.
Guides on how to install transmitter batteries and charge the model's battery packs safely.
Information on adjusting the battery compartments to accommodate different battery types and sizes for secure fit.
Guidance on optimizing battery placement for performance and details about the Traxxas High-Current Connector.
Explanation of the transmitter's controls and how to perform essential adjustments like neutral trim and sensitivity.
Instructions on operating the radio system, testing its range, and binding the transmitter to the receiver.
Guidance on adjusting steering sensitivity (exponential) and proper setup of the receiver antenna for optimal performance.
Information on maintaining a watertight receiver box, speed control adjustments, and crucial warnings for LiPo battery users.
Important checks before driving and the procedure for breaking in the slipper clutch for optimal performance.
Explains how to adjust springs and ride height to optimize suspension performance and handling.
Guidance on adjusting pivot ball caps for free movement and how to change shock oil for damping control.
Details on adjusting wheel toe and camber angles to optimize steering and handling characteristics.
Information on maximum alignment settings to avoid interference and how to tune the slipper clutch.
Guidance on selecting appropriate gearing, motor setup, and adjusting gear mesh for efficient power transfer.
Explains the dual-servo system, servo saver tuning, and optional maximum travel steering adjustments.
Procedures for inspecting the model for wear and damage, and performing regular maintenance tasks.
Guidelines for properly storing the model when not in use to maintain its condition.
Advanced adjustments for suspension geometry and alignment settings to enhance performance.
Details on adjusting caster angle, eliminating bump steer, and modifying roll center for improved handling.
Information on changing rocker arms to adjust suspension travel and progressive rate.
A guide to correctly positioning suspension components to eliminate unwanted steering changes due to bump steer.
Instructions on tuning shocks with different pistons and adjusting gear differentials with silicone oil for performance.
Details on various motor mounting positions to optimize center of gravity and clearance.
An overview of the Traxxas Link app's capabilities, including telemetry, model management, and interface usage.
Instructions on how to securely install and position an iPhone or iPod touch onto the TQi Docking Base.
Explains transmitter modes, LED indicators, and how to access basic tuning adjustments via menus.
Details on specific transmitter functions like braking percentage, throttle trim, and managing multiple models in memory.
A visual guide showing how to navigate through the transmitter's menu tree to access various settings.
Provides quick reference formulas and steps for adjusting transmitter settings without using the menu tree.
To Next Page