Need help?Do you have a question about the Traxxas Revo 5310 and is the answer not in the manual?
General| Brand | Traxxas |
|---|---|
| Model | Revo 5310 |
| Category | Motorized Toy Car |
| Language | English |
Contact information and support options for Traxxas products.
Guide to quickly get the model running, covering essential setup and break-in.
Contact details and resources for Traxxas technical support and service.
Explanation of warning, hint, and cross-reference icons used in the manual.
Key safety warnings regarding fuel, heat, operation, and radio interference.
Lists the tools and equipment provided with the Revo model.
Lists tools, fuel, batteries, and other items required to operate the Revo.
Lists recommended optional items for an R/C toolbox.
Steps covering safety, battery installation, antenna, and body setup.
Ensuring the radio system is functional, including range testing and servo checks.
Procedures for starting, breaking in, and tuning the engine for optimal performance.
Instructions for driving the Revo and essential maintenance.
Instructions on how to glue replacement tires to the rims.
Guidance on applying decals to the Revo's body.
Definitions of terms related to the Traxxas TQ-3 radio system.
Step-by-step instructions for installing 8 AA batteries into the transmitter.
Procedure for charging the 5-cell NiMh receiver battery pack.
Detailed steps for correctly installing the antenna mast and wire.
Explanation of TQ-3 controls, trim, and neutral adjustments.
Adjusting servo directions and programming the OptiDrive ESM.
Essential rules for operating the TQ-3 radio system safely.
Operating the system and performing range tests for safe operation.
Introduction to the TRX 2.5R Racing Engine's performance and design.
Detailed procedure for varying engine speed during the initial break-in period.
Critical role of air filter cleanliness for engine longevity.
Importance of after-run maintenance to prevent engine corrosion.
Importance of using correct fuel for performance and engine life.
Guidelines for safe fuel handling, storage, and tank filling.
Carburetor functions and how mixture needles control fuel delivery.
Detailed tuning of high-speed and low-speed needles.
Overview and installation of the EZ-Start system for engine starting.
Operating the EZ-Start, shutting off the engine, and clearing floods.
How to shift between forward and reverse gears using the transmitter.
Advice on driving techniques, handling, jumping, and obstacles.
Adjusting suspension springs and pre-load for optimal sag.
Changing ride height by adjusting push rod positions.
Adjusting toe and camber for optimal handling characteristics.
Adjusting the slipper clutch for torque control and drivetrain protection.
Adjusting the two-speed transmission and setting gear mesh.
Adjusting the dual-servo steering system for proper centering.
Adjusting brake pads and linkage for proper brake performance.
Procedures for cleaning the air filter and engine exterior.
Performing after-run maintenance and inspecting for damage.
Periodic checks and replacements for engine components like connecting rod.
Detailed steps for performing after-run maintenance to protect the engine.
Adjusting caster, bump steer, and roll center for advanced handling.
Changing rocker arms to modify suspension travel and progressive rate.
Replacing shock pistons and adjusting damping for performance.
Adjusting gear ratios, two-speed ratios, and differential oil.
To Next Page