The power bank is equipped
with charge level indicator
LED’s.
Press the “DC OUT” button to
activate the indicator. LED’s that
correspond to the current
charge level will light up.
CHARGING AND BATTERY
To obtain optimum power capacity, the FX100 should
be charged using the provided USB cable in your
packaging box. To charge the FX100, plug the USB side
of the cable into a power source and the Micro USB
side into the port on the back of the FX100.
The speaker is equipped with charge level indicator
LED’s. The current level of charge is displayed while
charging.
1. Charge level is between 0% and 25%: the 25%
indicator will begin to flash.
2. Charge level is between 25% and 50%: the 50%
indicator will begin to flash.
3. Charge level is between 50% and 75%: the 75%
indicator will begin to flash.
4. Charge level is between 75% and 100%: the 100%
indicator will begin to flash.
IMPORTANT CHARGING AND BATTERY
INFORMATION
Do not charge your speaker longer than for 6 hours at a
time, as this will lead to a reduction of battery capacity
and void your manufacturer's warranty.
Unplug the FX100 from the charging cable and the
cable itself from the power source when not in use.
If left unused, a fully charged battery will lose its
charge over time. We recommend fully charging the
FX100 twice a month to ensure sufficient battery life.
Do not leave the speaker exposed to extreme heat or
cold because this will reduce the capacity and lifespan
of the battery.
Do not place the speaker close to fire as the batteries
may explode. Batteries may also explode if damaged.
To charge the FX100 use only the cable provided in the
packaging box.
Make sure the speaker is completely dry before
charging.
IMPORTANT SAFETY INFORMATION
Never disassemble or modify your speaker for any
reason. Doing so may cause the speaker to malfunc-
tion or become combustible. Damaging the speaker
will void your manufacturer’s warranty. Do not use
excessive force when operating the speaker. Do not let
the speaker drop onto a hard surface.
Avoid exposing the speaker to extreme temperatures
(below 37F/3Co or above 112F/45Co). Extreme
temperatures may cause the deformation of the
protective cover and reduce lifespan of the FX100.
Avoid putting LED lights close to the eyes of humans
and animals.
Do not use the speaker outdoors during a thunder-
storm. Thunderstorms may cause malfunction and
increase the risk of electric shock.
TROUBLESHOOTING
The LED does not come on when turning the
speaker on
This can happen when the battery has lost charge.
Charge the FX100 for at least 30 minutes and the
problem should be solved.
Can't connect the speaker to your device
1. Turn off the FX100.
2. Go to the Bluetooth
®
menu on your source device
and delete all saved devices from the list by clicking
on “Forget this device”.
3. Turn the Bluetooth
®
on your source device OFF then
back ON; TREBLAB FX100 will be deleted.
4. Power OFF your source device then and then turn it
back ON.
5. Power ON the FX100.
6. Enter the device into the pairing mode and follow
the instruction for connecting.
My device is asking for a password
If prompted for a password, enter 0000 on your
device.
Frequent disconnection and noise
1. Ensure the FX100 is fully charged.
2. Ensure that the distance between your device and
the speaker is less than 30 feet / 10 meters.
3. Ensure that nothing is blocking the signal between
your device and the FX100.
4. Check if the music is paused.
5. Check if the volume level is set both on the source
device and on the speaker.
6. Check if the speaker is running out of power.
TECHNICAL SPECIFICATIONS
Bluetooth
®
version 4.1 + EDR
Bluetooth
®
profiles A2DP, AVRCP
Operating distance 30 feet / 10 meters
Battery life Up to 35 hours
Charging time Up to 6 hours
Output power 2x5W
Battery capacity 7000mAh
Frequency range 80Hz- 20KHz
Audio input AUX
Charging port type Micro USB
TREBLAB FX100 MEETS IP4 WATEPROOF
STANDART
SUITABLE:
Splashing
Snow
Accidential
short rain
We really appreciate that you chose TREBLAB as your
trusted brand of Bluetooth
®
speaker and sincerely
hope you enjoy the great sound and comfort TREBLAB
provides. We love making our customers happy by
providing true value with our products.
If for any reason you are not completely satisfied with
your purchase, let us know immediately and we will do
everything to make sure you are happy.
To Next Page
Loading...
