will start flashing BLUE and GREEN, indicating pairing with the Slave speaker.
Turn On the Bluetooth on the smart device. The speakers will connect
automatically.
Once paired, the Master speaker's LED indicators will slowly flash BLUE.
To disable the TWS function and disconnect the Master and Slave speakers, press
and hold the VOLUME + and VOLUME - buttons simultaneously on the Slave
speaker for 5 seconds until the BLUE LED light flashes, indicating the connection
is lost.
AUDIO PLAYBACK
To pause and resume playback when connected wirelessly, press the PLAY
button.
To adjust the volume, press the VOLUME + or the VOLUME - button while
listening to music.
To change the track on the HD77, press and hold the VOLUME + or the
VOLUME - button for 2 seconds.
3.5 MM AUDIO CABLE CONNECTION
You can connect
TREBLAB HD77
to compatible devices using the supplied
3.5 mm audio cable.
To Next Page
Loading...
