EasyManua.ls Logo

TREBLAB J1 - How to Charge

TREBLAB J1
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
Voice Prompts
Battery Capacity Displayed on Device, CVC6.0 echo
noise cancellation with APTX technology.
IPX-6 Sweat-proof
Bluetooth Version 4.1 + EDR
Bluetooth Profiles Headset, Hands free,
A2DP, AVRCP
Operating Distance 30 feet / 10 meters
Talk time Up to 9 hours
Standby Time 240 hours
Charging Time About 2 hours
Charging Port Micro USB
LI-battery Capacity 100 mAh, rechargeable
HOW TO CHARGE
The battery has approximately 9 hours of battery life.
When the sound becomes intermittent, you hear Low
Battery, or if the LED indicator flashes two times every
20 seconds, it means the battery is running low. Once
this happens, you have about 5-10 minutes of use
before the earphones power off automatically.
Charge the batteries by:
Using the provided USB/micro USB cable, connect
the micro USB end of the charging cable to the
micro USB charging port and the standard USB end
to a PC USB port or USB charger.
The LED indicator will be red while charging. It will
turn blue after 1-2 hours. The battery is now fully
charged.

Related product manuals