TREBLAB X1 - Charging the Earbuds; Setting Up Your TREBLAB X1; Turning Earbuds ON

Be sure to use a5V DC, 0.5 - 14 adapter or charger. Using a power source
with lower power wil increase the overall cherging tme.
2.7o charge the earbuds with the charging case
When the earbuds' battery is low, youl hear the five-tone sound prompt.
To charge the earbuds, put both earbuds Into the respective siots in
the charging case. The earbuds wil turn off automatically and start taking
the charge. The red LED indicators of the earbuds will turn on. It takes
about 2 hours to charge the earbuds fully. When the earbuds are fully
charged, the LED indicators wil tur green for 1 minute and go off.
SETTING UP YOUR TREBLAB X1
To turn the earbuds ON
1. Take the earbuds out of the case, the earbuds wil Lur on automatically.
2. Another option to tum them on s to tap on the Touch panels of both
earbuds and hold for 2 seconds. You wil hear the ascending four-tone