TREBLAB X1 - Pairing; Pairing Both Earbuds

PAIRING
You can pair the X1 earbuds with your device either together or separately.
Using only one earbud at a time wil help you to extend the overall playtime.
Please read the instructions below to make the pairing process smooth
and easy.
To pair both earbuds
1. Open the case lid and take the earbuds out of the case. The green
LEDS on both earbuds will start flashing rapidly and, a few seconds
later, the LED on one of the earbuds will start flashing green and red.
2. Activate Bluetooth on the device, scan/search for TREBLAB X1,
and click CONNECT.
3. prompted by your device to connect, select Yes.
4. You will hear the double-beep sound prompt indicating that the
earbuds are connected, The LED indicators will 9o off.