TREBLAB X1 - Voice Assistants Support; Reset to the Factory Settings

NOTE:
Make sure not to cover the earbuds with anything while using the
Transparency mode.
VOICE ASSISTANTS SUPPORT
TREBLAB X1 earphones are compatiole with Sir, Google Voice Assistant
and others. To use a voice assistant, tap on either earbuds Touch panel
four times.
RESET TO THE FACTORY SETTINGS
You can reset the X1 earbuds to the factory Gefault settings by cleaning
Up the paring st with the last 6 connected to X1 evices.
Make sure that the charging case has some charge. Put the earbuds
into the charging case and leave the lid open. Press and hoid the case
MFB for 10 sec until you see the redbiue LEDs blinking 3 times on the
case and greenvred LEDS biinking 3 times on the earbuds. The earbuds
memory Is returned to the factory settings now.