hear “Pairing” voice prompt; red and blue LED lights will flash rapidly.
• Activate Bluetooth on your device and keep it within 3 feet / 1 meter from the
earbuds while pairing.
• Using your Bluetooth enabled device, scan/search for available Bluetooth
devices (check your device’s manual if you’re unsure how to do this).
• Select TREBLAB X2 from the device list
• If prompted by your device to connect, select Yes.
• You will hear “Connected” from right earbud after successful connection.
• Long press POWER button on the left earbud for 1 second.
• You will hear “Power ON” voice prompt in the left earbud.
• Wait 5-10 sec., the left earbud will automatically connect to the right earbud.
• You will hear “Connected” from left earbud after connecting.
• When paired, LED indicators on both earbuds will flash blue every 7 seconds.
• The next time you switch on the earbuds, they will automatically search for and
attempt to connect to the last paired device.
Pairing only right earbud
2
• Long press POWER button on the right earbud for 4 seconds.
• You will hear “Power ON” voice prompt in the right earbud. Keep pressing
POWER button until you hear “Pairing” voice prompt.
•Red and blue LED lights will flash rapidly.
• Activate Bluetooth on your device and keep it within 3 feet / 1 meter from the
earbud while pairing
• Using your Bluetooth enabled device, scan/search for available Bluetooth
devices (check your device’s manual if you’re unsure how to do this).
• Select TREBLAB X2 from the device list.
• If prompted by your device to connect, select Yes.
• You will hear “Connected” from right earbud after successful connection.
To Next Page
Loading...
