Siri
TREBLAB X2 headphones are Siri-compatible. To use Siri: Long
press right MODE button for 1 second.
Phone calls
Note: Even when you use both earbuds, only the right earbud produces sound
during phone calls, this is completely normal.
• To answer an incoming call: Single click right POWER button.
• To reject an incoming call: Single click right MODE button.
• To finish the conversation: Long press right MODE button for 1 second.
while on the line
Pairing only left earbud
3
• Long press POWER button for 1 second until you hear "Power ON ".
• Long press MODE button for 4 seconds until you hear "pairing mode ". Red
and blue LED lights will flash rapidly.
• Activate Bluetooth on your device and keep it within 3 feet / 1 meter from the
earbud while pairing.
• Using your Bluetooth enabled device, scan/search for available Bluetooth
devices (check your device’s manual if you’re unsure how to do this).
• Select TREBLAB X2 from the device list.
• If prompted by your device to connect, select Yes.
• You will hear “Connected” from right earbud after connecting.
When you are using only left earbud, some remote control functions ( answer
call / reject call / hang up call / volume up / volume down) will not be
available. You will still be able to answer / reject phone calls or control volume
using your device.
To Next Page
Loading...
