TREBLAB X3 Pro - Pairing a Single Earbud

3. If prompted by your device to connect, select Yes.
4. You will hear the “Pairing successful” voice prompt in the
left earbud and “Connected” in both earbuds.
After that, you may see a prompt to pair the right earbud
(TREBLAB X3 Pro_R). If prompted, pair the right earbud as
well. This will enable you to use the earbuds independently
from one another in the future.
When you turn the earbuds ON, they will attempt to
reconnect with the most recently connected device. If
reconnection does not happen automatically, the earbuds
will attempt to reconnect to the next device in the pairing
list. You can only connect and play audio from one device at
a time. But you can save up to seven connected devices in
the pairing list.
To pair one earbud only
1. Take one earbud out of the charging case. You will hear
“Power ON" and in a few seconds, "Pairing".
2. Activate Bluetooth on the device, scan/search for
TREBLAB X3 Pro_L or TREBLAB X3 Pro_R (depending
on which earbud you are trying to connect), and click