TREBLAB X3 Pro - Pairing TREBLAB X3 Pro; Pairing Both Earbuds

You will hear the “Power OFF" voice prompt, and the red
LEDSs will light up and then go off.
PAIRING
You can pair the X3 Pro earbuds with your device either
together or separately. Using only one earbud at a time will
help you extend the overall playtime. Please read the
instructions below to make the pairing process smooth and
easy.
Note: To ensure the optimum performance, we recommend
keeping as short a distance as possible between the
Bluetooth device and the TREBLAB X3 Pro.
To pair both earbuds
1. Take the earbuds from the charging case. You will hear the
“Power ON” voice prompt in both earbuds and the “Pairing”
prompt in the right earbud. A few seconds later, the “Pairing”
prompt will sound in the left earbud as well.
2. Activate Bluetooth on the device, scan/search for
TREBLAB X3 Pro_L, and click CONNECT.