TREBLAB X3 Pro - Setting Up Your TREBLAB X3 Pro; Turning Earbuds ON; Turning Earbuds OFF

SETTING UP YOUR TREBLAB X3 Pro
To turn the earbuds ON
1. Once removed from the charging case, your earbuds will
turn on automatically.
2. You can also turn them on by holding the MFB button on
both earbuds for 2 seconds.
3. You will hear the “Power ON" voice prompt in both earbuds
and the “Pairing” prompt in the right earbud. A few seconds.
later, the “Pairing” prompt will sound in the left earbud as
well. The LED indicator light on the right earbud will blink blue
every second and the light on the left earbud will flash blue
and red.
4. When the earbuds are connected to the source device,
you will hear the “Connected” voice prompt.
To turn the earbuds OFF
1. Put the left and right earbuds into the slots in the charging
case. The earbuds will turn OFF automatically.
2. Alternatively, press and hold the MFB on both earbuds for
3 seconds.