EasyManua.ls Logo

treesse Fusion Spa 200 - Page 7

treesse Fusion Spa 200
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Pre-Installation Fusion minipool
EN
45
115
180
142 19
10
66,5
90
230
19219
26
7
26
7,5
PLATFORM
ok
ok
60
cm
cm
235
185
85
3,7 m
3
180 x 230 x 66.5 cm
(70.8 x 90.5 x 26.2 inch)
maximum
water
content
1000 litres
(265 gal)
weight
with water
1210 kg
(2,667.5 lb)
weight
when empty
210 kg
(463 lb)
Volt
230
380 on request
Amperes
14-22
(230V)
whirlpool pump
motor
1.8 Hp
absorbed
power
1.35 kW
recirculation
motor
0.16 Hp
absorbed
power
115 W
temperature
control
3 kW
ltering
system
sand
operating
pressure
2 - 6
bar
operating
temperature
-5°C min
+45°C max
Size in cm
dimensional tolerances ± 5mm.
The manufacturer reserves the right to make improvements to the equipment at any time, without prior notice.
Partial reproduction without the manufacturer's consent is prohibited. Measurements are purely indicative and not binding.
The original language of this manual is Italian: the Manufacturer is not responsible for any mistakes in translation/interpretation.
1
FUSION SPA
230 -
MEASUREMENTS AND TECHNICAL SPECIFICATIONS
The manufacturer suggests a
minimum load of 425 kg/m
2
.
whirlpool pump motor position
Packaging Freestanding Recessed Drain Insulation
for pipes

Related product manuals