Need help?Do you have a question about the treesse ATC System and is the answer not in the manual?
Provides critical safety advice for operating the hydromassage tub, covering electrical safety, water temperature, and user precautions.
Details electrical connection requirements, compliance with laws, and safety measures for installing the tub.
Explains the different operating modes of the remote control: BLOCKED, READY, STAND BY, and NO-INIT.
Details steps to exit the BLOCKED mode and switch to READY mode for the remote control.
Guides the user through the initial activation process, explaining signal presence and association issues.
Explains how the remote control enters standby mode and how to exit it by moving the control.
Provides a legend for function keys and warning icons displayed on the remote control.
Explains how to activate/deactivate functions using keys and the meaning of icon backlighting colours.
Instructs on how to place the remote control on the charging station and how battery status is displayed.
Details the function of Key P1 for activating Whirlpool, water level checks, and temperature regulator control.
Explains the disinfection procedure using Key P2, including steps, duration, and safety precautions.
Describes how Key P3 activates the Airpool function and how to adjust its speed using P4a/P4b keys.
Details how to use Keys P4a and P4b to adjust the speed of the Airpool blower.
Explains the 'blowing after' function for residual water elimination, its activation, and steps.
Details how Key P5 starts the colour therapy cycle and how to switch it on/off or change colours.
Explains how Key P6 allows manual colour selection for the colour therapy and how to disable it.
Indicates that keys P7, P8a, and P8b are not covered in this manual.
Explains Key P9 for adjusting sound system volume and reporting battery/receiver signal status.
Details how the hidden key TN can be used to switch the remote control completely off and restart it.
Explains that Led S1 displays the status of the temperature regulator (blue if on, off if deactivated).
Explains that Led S2 displays the water level status (blinking blue if not present, fixed blue if present).
Provides guidance on cleaning tub surfaces using neutral cleaners and lists forbidden products/materials.
Explains the importance of regular maintenance, product recommendations, and safety precautions before work.
To Next Page
General
