13
The disinfection function is an automatic procedure of cleaning of the entire water circuit of the tub,
including the tanks. This function is enabled after every use of the tub or after prolonged periods of
inactivity of the same
_DISINFECTION
DISINFECTANT
On the tub, there is the cap of the tank for disinfection.
The cap can be opened by push&pull, allowing you to fill itg with liquid for disinfection. It is
recommended to use a NON chlorine-based disinfectant liquid product.
For details about how to use the disinfection function, see page 9 (key P2).
To Next Page
Loading...
