18
EN
Muse - Maya - Wave minipool
Alarms
PROBLEM POSSIBLE CAUSE SOLUTION
Water leaks
Some component is probably not fully
tightened or the seals are worn.
Check the tightness or replace the
seals.
The water of the minipool does not
become clear
Most likely the pH of the water supply
is incorrect and so algae grows.
For more information see
chapter “Characteristics of the
water supply” on page 11
Use disinfectants.
Remember that the paper lter does
NOT block metal oxides that may
over time damage components of the
minipool.
To Next Page
Loading...
