Specifications (cont.)
GENERAL
Power Requirements
Battery Eliminator/Charger Optionally available for all nominal
line voltages. Contract Trek, Inc. or
an authorized service organization for
more information. NOTE: If line
impulses exceed 500 V when using
the battery eliminator/charger, the unit
may reset and require operator
assistance
Specifications
Output Connector 2.1 mm DC power plug.
Output Voltage 12 to 14 V DC.
Output Current 1 A.
Battery Operation Rechargeable battery supplied.
Operating Time 8 hours with full charge.
Recharge Time 3 hours to full charge.
Other Low battery indicator.
Full charge indicator.
Operating Conditions
Temperature 5 °C to 35 °C.
Relative Humidity To 80%, noncondensing.
IV - 4
Specifications
To Next Page
Loading...