Trek DOMANE DISC - Special Features; Condition 1 Bicycle; Carbon Fiber Fork; Disc Brakes

2
FIGURE 2 Disc brake
DISC BRAKES
The Domane Disc uses disc brakes
(Figure 2). The disc brake system requires
special care:
r5IFSFBSFTFWFSBMTJ[FTPGEJTDPS
rotor, available for bicycles. With this
frame and fork, use only 160mm rotors.
Changing rotor size requires adding or
removing spacers to correctly locate
the brake. Changing the spacers on this
bicycle may cause damage to the fork.
r8IFOUIFXIFFMJTPVUPGUIFGSBNFEP
not operate the brake lever. Some disc
brakes automatically adjust clearance
when you apply the brake. If the
disc is not there, the brake will set the
clearance to the other pad, so you will
not be able to insert the disc between
the pads.
r'PSNPSFJOGPSNBUJPOBCPVUEJTDCSBLFT
read the owner’s manual.
FIGURE 1 Domane Disc carbon ber fork
CARBON FIBER FORK
This bicycle has a fork made from carbon
ber composite (Figure 1). Carbon ber
can be aected by extreme heat, and
a disc brake during heavy use gets very
hot. To prevent heat from aecting the
fork, this bicycle has insulating spacers
between the fork and the brake. Do no
remove these spacers.
CONDITION 1 BICYCLE
This bicycle is equipped with disc brakes
and thru-axles. In the past, these features
were associated with mountain-bike
equipment, but this bicycle is designed
for Condition 1 riding, which is on paved
surfaces only.
SPECIAL FEATURES
The Domane Disc is a road bike with
a unique combination of features:
Condition 1, carbon ber fork, disc
brakes, and thru-axles. Before riding
this bike, you should familiarize yourself
with these features by reading this
supplement and the Trek Bicycle Owner’s
Manual.