EasyManua.ls Logo

Trek ROSCOE 7 - Bicycle Specifications; Chainline and Chainring Specs; Rear Brake Mount Specifications; Maximum Tire Size Compatibility

Trek ROSCOE 7
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2022 Roscoe
5
Specications
Chainline (1x only)
52–55 mm
Chainring (1x only)
Chainline Chainring
Min Max
52 28T 32T
55 34T
Rear brake mount
Minimum Maximum
160 mm, direct mount Adaptable to 180 mm
Maximum tyre size
Notice: Measurements of actual tyres may vary. Always
verify there is sufcient clearance between the tyre and
the frame. Improper tyre size could damage the bicycle
frame. Trek recommends 6 mm clearance above and on
the sides of the tyre.
Wheel set Maximum tyre size
29" 29.0" x 2.60"
27.5" 27.5” x 2.60”
Seat post
WARNING
Always follow the seat post manufacturer’s minimum
insertion recommendation. Failure to follow the recom-
mendation could cause damage to the seatpost and
result in injury to the rider.
1
3
2
Item Measurement
1 Maximum
insertion
Extra small 190 mm
Small 200 mm
Medium 240 mm
Medium/large
Large 250 mm
Extra large
2 Minimum insertion 75 mm*
3 Seat tube inside diameter 31.6 mm
Seat tube post clamp outer
diameter
36.2 mm
*Follow the seatpost manufacturer guidelines.
Bottom bracket/ISCG tabs
Bottom Bracket ISCG Tabs
BSA73 ISCG 05

Related product manuals