Need help?Do you have a question about the Trek RIDE+ and is the answer not in the manual?
General| Battery Voltage | 36V |
|---|---|
| Battery Type | Lithium-Ion |
| Assist Modes | Eco, Tour, Sport, Turbo |
| Display | Bosch Purion |
| Range | Up to 70 miles |
| Drivetrain | Shimano |
| Brakes | hydraulic disc |
| Weight | 22.5 kg |
| Max Load | 136 kg |
Introduces the electric bicycle, its classes (Pedelecs, Fast Electric Bikes), and general features.
Explains system on/off, assistance/regeneration levels, and lights for the BionX G2 controller.
Details system on/off, assistance/regeneration levels, lights, and RIDE+ Link for the RIDE+ Pro controller.
Covers system on/off, assistance/regeneration levels, and lights for the RIDE+ EASY controller.
Explains system on/off, assistance/regeneration, lights, and distance display for RIDE+ EASY II controller.
Details the power supply and process for charging the battery-pack.
Explains how to remove and replace the rack battery-pack.
Details how to remove and replace the down tube battery-pack.
Identifies key components like battery-pack, motor, controller, brake switch, and wiring harness.
Describes the functions of BionX G2, RIDE+ Pro, RIDE+ Easy, and RIDE+ Easy II controllers.
Explains the function and location of brake switches in different brake types.
Describes the role of the wiring harness in connecting system components.
Explains how assistance and regeneration levels work and provides tables for effort compensation.
Details the operation and adjustment of the Bontrager Satellite Elite ForkLight.
Covers legal classification, insurance, and safety recommendations for 40km/h bikes.
Lists additional/different parts for 40km/h bikes compared to Pedelecs.
Provides guidance on riding and range expectations for 40km/h bikes.
Explains system functions, assistance, regeneration, and display for the BionX G2 controller.
Details system functions, assistance, and regeneration for the RIDE+ Pro controller.
Explains system on/off, assistance/regeneration levels, and switching lights for the RIDE+ EASY controller.
Covers system on/off, assistance/regeneration, lights, and distance settings for the RIDE+ EASY II controller.
Details battery-pack sizes, RIDE+ compatibility, and how to remove/install the rear rack battery.
Explains Downtube battery-pack sizes, bottle cage holder, and removal/replacement.
Provides instructions and warnings for charging the battery-pack.
Covers storage, recycling, and general care for the battery-pack.
Offers tips for maximizing electric bicycle use and provides range estimates.
Explains how to set odometer units, clock, wheel diameter, and swap button functions.
Provides instructions for cleaning the electric bicycle and its components.
Details the process for removing and refitting the rear wheel with a rear hub motor.
Details the process for removing and refitting the front wheel with a front hub motor.
Lists technical specifications for the motor, power output, speed, and torque.
Details specifications for different RIDE+ battery packs (Voltage, Capacity, Power, Weight, Life).
Lists minimum and maximum temperatures for charging, use, and storage of the battery.
Details the specifications of the power supply unit.
Addresses issues like the system not switching on or the motor always in generative mode.
Covers display not showing 'full', charging light issues, and green light after 10 minutes.
Explains occasional display activity and blank screens.
Outlines warranty terms, coverage, exclusions, and claim process for electric bicycle components.
To Next Page