TrekStor PRIMEBOOK P14 - Changing Display Language

24
17. Changing the display language
Proceed as follows to change the display language:
a) Make sure that your Primebook is connected to the Internet (see Section 14).
b) Call up the settings (see Section 13).
c) In Settings, tap "Time & language" and then tap "Region & language" on
the left. You are now in the "Country or region" window.
d) Now tap "Add a language" in the centre of the screen.
e) Scroll to and tap the language you require.
i
ADVICE
The Primebook jumps back to the "Country or Region" window, but now
displays the selected language in the list of languages below "Add a Language".
i
ADVICE
The Primebook now downloads the language pack and installs it. This process
can take a few minutes.
f) Wait until the "Language pack available" message appears under the
selected language in the list.
g) Tap the selected language and than tap "Set as default" below the
selected language.
h) Restart your Primebook. The selected language now appears in the display.