-10-
EN - AIR/PRO
TECHNICAL SPECIFICATION
Weight 1.0kg nominal
Head Size Range 54 - 61cm
Protection Factor Assigned (APF)20
Humidity 0-90% storage and use (store out of direct
sunlight)
Temperature Range
Charging +5°C to +40°C
Use -5°C to +40°C
Storage +5°C to +40°C
Airflow
Initial 210 l \min
Minimum 150 l \min
Power Supply
Battery Pack 3 cell
Nominal 3.6V
Capacity 3.5 Ah per pack NiMH
Battery life 8 hrs (Fully charged battery pack tted)
Charging Method/Rate Mains charger
14 hrs from fully discharged
Battery Charger
Input UK 230 10% VAC
Nominal Power Consumption 4W
No Load output 12VDC
Nominal output voltage 4.2 V
300 mA IP 20 indoor use only
CE EN 60335-1, 60335-2-29
AIRSHIELD PRO DECONTAMINATION
RETURN PROCEDURE
IMPORTANT NOTICE:
Trend Machinery & Cutting Tools Ltd cannot accept
any Respirator for service or repair unless the following
information has been supplied separately externally
attached to the packaging.
Please use the returns form provided with your
Respirator.
Name of
company
Address
Telephone
Fax
Email
Contact Name Type
of business
Process ESM used for
Serial Number of
Respirator Specific
contaminant
a) Name of
b) Manufacturer of
c) Brand name
d) By-Product of
a Process
Please provide Health and safety data sheet for
contaminant. Any known allergic reactions caused by the
contaminant. From whom the unit was purchased.
The date the unit was purchased.
Specific reason for return, please provide as much detail
as possible.
• Respirators without this information attached
will be returned to source without any further
action being taken.
• Respirators that have not been thoroughly
decontaminated inside and out will be returned
to source without any further action being taken.
To Next Page
Loading...
