VARIJIG
-1-
Dear Customer
Thank you for purchasing this Trend product, we
hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
CONTENTS
TECHNICAL DATA _____________________1
SAFETY ____________________________2-3
ITEMS ENCLOSED ____________________4
DESCRIPTION OF PARTS _____________4-5
ASSEMBLY & ADJUSTMENT ____________6
OPERATION
– Fitting Anti-Tilt Shoe ___________________7
– Guiding the router ____________________7
– Adjusting Frame for Size _______________8
– Clamping Varijig Frame ________________8
– Routing Squares and Rectangles ________9
ACCESSORIES ______________________10
MAINTENANCE ______________________11
ENVIRONMENTAL PROTECTION________11
GUARANTEE ________________________11
SPARE PARTS
– Spare Parts List _____________________12
– Spare Parts Diagram _________________12
TECHNICAL DATA
Extrusion thickness 15.8mm (5/8”)
Extrusion width 54.0mm (2 1/8”)
Working area size (max.) 600mm x 600mm
(23 5/8” x 23 5/8”)
Guide bush spigot
length (min.) 8mm (5/16”)
Weight 2.1kg (4.6lbs)
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
This unit must not be put into service until it has
been established that the power tool to be
connected to this unit is in compliance with
2006/42/EC (identified by the CE marking on the
power tool).
INTENDED USE
The jig allows a variety of squares and
rectangles to be routed with a portable plunge
router with guide bush and suitable router cutter
fitted.
☎
If you require further safety advice,
technical information or spare parts,
please call Trend Technical Support
or visit www.trend-uk.com
MANU-VJS v3.0_MANU-VJS v3 18/06/2012 09:41 Page 1
To Next Page
Loading...