configuration of the application. For Device Identification, the application will send
a description of the WLAN ADSL Router as a control point back to the host
making the request.
UPnP: Select to enable or disable the UPnP feature on the WLAN ADSL Router.
WAN Interface: Select WAN interface that will use UPnP from the drop-down
lists.
RIP
Enable the RIP if you are using this device as a RIP-enabled router to communicate
with others using the Routing Information Protocol. This page is used to select the
interfaces on your device is that use RIP, and the version of the protocol used.
59
To Next Page
