© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-732BR
22
Note: If you change the router login password, you will need to access the router
management page using the User Name “admin” and the new password instead of
the default password “admin”.
User (Optional): The User account is an additional account used for viewing the settings
on the router management page only. Accessing the router management page using the
User account will restrict access to viewing only and will not allow any settings to be
changed.
Default User Name: user
Default Password: user
Set your router date and time
Main > Time
1. Log into your router management page (see “
Access your router management page”
on page 21).
2. Click on Main, and click on Time.
3. Next to Time Zone, click the drop-down list to select your Time Zone.
4. Next to Synchronize the clock with, you can choose one of the following options:
• Manual: Set your router date and time manually in the Set Time section. To save
changes, click Apply.
Note: Time is specified in 24-hour format.
OR
• Automatic: Set your router date and time to synchronize with an NTP (Network
Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP server address next
to Default NTP server, (e.g. pool.ntp.org). Next to Daylight Saving, set the annual
range when daylight saving is activated. To save changes, click Apply.
Note: NTP servers are used for computers and other network devices to synchronize
time across an entire network.
5. You can verify the time/date settings next to Local Time at the top of the page. Local
Time displays the current date and time set on your router.
Manually configure your Internet connection
Main > WAN
1. Log into your router management page (see “
Access your router management page”
on page 21).
2. Click on Main, and click on WAN.
3. In the Connection Type drop-down list, click the type of Internet connection provided
by your Internet Service Provider (ISP).
4. Complete the fields required by your ISP.
5. Complete the optional settings only if required by your ISP.
6. To save changes, click Apply.
To Next Page
