© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-732BR
5
• WPS (Wi-Fi Protected Setup): Push and hold this button for 3 seconds to activate
WPS. The button LED is blinking blue when WPS is activated.
• On/Off Power Switch (EU only): Push the router On/Off power switch to turn your
router “On” (Inner position) or “Off” (Outer position).
Front View
• Power LED: This LED indicator is solid green when your router is powered on.
Otherwise if this LED indicator is off, there is no power to your router.
• WAN (Link/Activity) LED: This LED indicator is solid green when your router WAN
port is physically connected to the modem Network port (also called network port)
successfully with a Network cable. The LED indicator will be blinking green while
data is transmitted or received through the WAN port of your router.
Application Diagram
The router is installed near the modem (typically supplied by your ISP “Internet Service Provider”)
and physically connected to it from the router’s Internet port to the modem’s network port which
connects to the Internet. 2.4GHz wireless signals from the router are broadcasted to wireless
clients such as laptops (with wireless capability).
To Next Page
Loading...
