English
3
1. Insert the Utility CD-ROM into
your computer's CD-ROM Drive
and then click Install Utility.
3. Click Start > All Programs > PS-
Utility, and then click PS-Utility.
2. Follow the InstallShield Wizard
instructions. Click Finish.
3. Configure the Print Server
Note: The Print Server can be managed using the PS-Utility or a web browser.
For Mac users, change your computers IP address to 192.168.0.X (where X is
an available number from 2-254). Since the Print Server's default IP address is
192.168.0.1, make sure no other network devices are assigned an IP address
of 192.168.0.1. Then enter http://192.168.0.1 in your web browser to access
the Print Server's Web Utility.
For Windows Users
To Next Page
Loading...
Need help?
General
