Q: How do I find the Port Name of the Print Server?
A:
First, launch your web browser (such as the Internet Explorer 6.0 used in this manual). Then, type
http://192.168.0.1 (the default IP address) in the Address bar and press [Enter] to enter the
Management screen of the Configuration Utility. Or use the IP address that you manually assigned
to the Print Server. Click on “System” and the Port Name is the PS-xxxxxx-P1, x being the actual
number listed in the Port Name box. Please write this information down on a piece of paper for
future reference.
Q: How do I make it Wireless?
A:
Step 1. First you will need to know the SSID of your wireless router or access point, along with
the Channel. If you are using any type of wireless security like WEP, you will need to
know the key values.
Step 2. Launch your web browser (such as the Internet Explorer 6.0 used in this manual). Then,
type http://192.168.0.1 (the default IP address) in the Address bar and press [Enter] to
enter the Management screen of the Configuration Utility. Or use the IP address that you
manually assigned to the Print Server.
TEW-P1PG F.A.Q.
To Next Page
Loading...
Need help?
General
