TEW-P1PG F.A.Q.
Step 3. Click on “Configuration” on the top Menu bar and click on “Wireless” on the side bar.
You can now input the SSID and Channel or you can click on “Site Survey”. If you are using WEP
Encryption, select the type of encryption and key in the value in Key 1 and click “Save”.
Once you have saved the settings, unplug the Ethernet cable from the back of the Print
Server and unplug the electrical power for 15 seconds then plug the power back in. Start
the PS-Utility and see if the utility finds the print server. If it does, then the unit is wireless
at this point. If not, plug the Ethernet cable back into the print server and confirm the
Wireless information.
Note: The Encryption method and key value is case sensitive and must match your router or
access Point.
Step 4.
Q: How do I install my printer on Windows 95/98/ME?
A:
In Windows 98/Me you will need to install the LPR client.
Installing LPR:
Step 1. Once the file is downloaded and extracted, Go to Start > Settings > Control Panel >
double-click on Networks. Click on Add.
For Windows 98/ME you will also need to know the port name that you are printing to (The Port
Name is the PS-xxxxxx-P1. X being the actual number listed in the Port Name box).
To Next Page
Loading...
Need help?
General
