- 31 -
- Password: Enter the Administrator password (3-8 characters).
To set up the password, please enter the password in the New
Password box, and then enter the same one again in the Confirm
Again box.
Port Settings
In this field, you can assign the Port Name for the print server, and the
description for the LPT port. It also allows you to select the PJL
Printer setting (Yes or No).
NOTE: PJL (Print Job Language) has certain job requirements that
must be met to work correctly. For more information, please refer
to your printer’s manual.
To Next Page
Loading...
Need help?
General
