- 33 -
• Ad-Hoc - Connect to compatibly configured wireless clients
in the peer-to-peer mode.
- SSID: Assign the SSID in this box. You can manually input the
name or select one from the pull-down menu. To search the
available wireless AP within the network, click the Site Survey
button.
- Wireless Channel: Select the channel from the pull-down menu.
The default setting is 11.
- Transmission Rate: Select the data transmit rate from the pull-
down menu. The default setting is Fully Automatic.
WEP Encryption
This field allows you to configure the settings of data encryption.
Please remember that the WEP key must be set before the data
encryption is enforced.
- WEP Encryption: This option allows you to select Disable, 64
bits, and 128 bits for the encryption setting.
- WEP Key Format: You can decide the network key to be
encoded by ASCII (ASCII characters) or HEX (hexadecimal
digitals).
Then, enter the key(s) for the network in the Key box (1~4).
To Next Page
Loading...
Need help?
General
