ENGLISHFRANÇAISDEUTSCHE
ESPAÑOLРУССКИЙ
3. Hardware Installation
The PoE+ injector can be placed on a desktop, wall, or mounted to a DIN-Rail.
DIN-rail Mounting Instructions
1. Attach the DIN-Rail mount to the PoE+ injector.
2. Position the unit in front of the DIN-Rail and hook the mount bracket over the top of the rail.
3. Rotate the fiber converter downward towards the rail to lock it into place. You will know it is
secure when you hear the click.
Mounting the unit Releasing the unit
4. To remove the unit, pull down to clear the bottom of the DIN-Rail and rotate up, away from
the rail.
2
To Next Page
Loading...
Need help?
General