SEAT CAP INSTALLATION
14
SECURITY LABELS INSTALLATION
15
The homeowner is responsible to install all safety labels.
SSE Labels (4) :
The safety labels shall be visible from any potential entry points of
the pool. Also, make sure to install safety labels at all access points
of your yard.
PAPTH Label (1) :
The safety label shall be placed at the entrance of the pool, visible
and never covered.
Put the seat cap on the inside section of the seat and interlock with
the upright. Secure the seat cap with one (1) screw “Z”.
Snap the cap logo on top of the upright and secure the bottom with
one (1) screw ‘’Z’’.
Important: if you require additional labels, please contact us at
Trevipools.com
To Next Page
Loading...
