IP 360 S8
14
IMPORTANT SAFETY INSTRUCTIONS
• To reduce the risk of electric shock, do not remove the cover or back. There are no
user-serviceable parts inside. Refer servicing to qualified personnel.
• To prevent fire or electric shock hazard, do not expose the unit to rain or moisture.
• Keep the product away from direct sunlight and heat source such as radiators or stoves.
• Do not block the ventilation openings. Slots and openings on the unit are provided for
ventilation. The openings should never be blocked by placing your product on a cushion,
sofa or other similar surface.
• Do not place the product on unstable cart, stand, tripod, bracket or table. The unit may
fall, resulting in possible damage or injury.
• Unplug the power from the outlet when the unit is not in use.
• Attention should be drawn to the environmental aspects of battery disposal.
• WARNNING: The battery shall not be exposed to excessive heat such as sunshine, fire
or the like.
• WARNNING: Only use attachments/accessories specified provided by the manufacturer,
the product is supplied by adapter, the AC adapter is used as disconnect device, the
disconnect device shall remain readily operable.
• All trademarks and copyrights are the property of their respective rights holders.
• The appliance must not be exposed to dripping or splashing water. No objects filled
with liquid, such as vases, must be placed on the appliance.
• If liquids penetrate inside the appliance, immediately disconnect the plug from the socket
or remove the battery and take the appliance to the nearest authorized TREVI service
center.
• No naked flame sources, such as lighted candles, must be placed on the appliance.
• Please read and keep this Instructions.
The symbol indicates that dangerous voltages constituting a risk of electric shock
are present within this unit
The symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
CAUTION:
When the apparatus was in electrostatic circumstance, it may be malfunction and need
to reset by user.
ENGLISH
To Next Page
Loading...
