11
TO CHANGE THE BATTERIES
WEATHER STATION TRANSMITTER
Remove the transmitter from the stand and open the 1.
battery door.
Insert 2 AA size batteries into the battery compartment.2.
Make sure you insert them the right way according 3.
to the polarity information marked on the battery
compartment.
Close the battery door.4.
NOTE:
Once the channel is assigned to one transmitter, it can only
be changed by removing the batteries or resetting the unit.
Avoid placing the transmitter in direct sunlight, rain or snow.
WEATHER STATION RECEIVER
Remove the battery door and insert 3 AA batteries into 1.
the battery compartment. Make sure you insert the bat-
teries the right way according to the polarity information
marked on the battery compartment.
Close the battery door.2.
Press the “RESET” key to re-start the clock and it 3.
will automatically synchronize to the channels of the
transmitter.
NOTE:
The building material and the position of the receiver and
transmitter affect the effective range. Try multiple locations
To Next Page
Loading...