EasyManua.ls Logo

TRG C8243 - Viewing the Channel

TRG C8243
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Repeat the above operation to set the alarm minute.5.
After you complete all settings, press the “ALARM” key 6.
to exit the setting mode, or let it exit automatically 30
seconds later without pressing any key.
NOTE:
The alarm will be automatically turned on when setting
the alarm time.
Once the snooze is turned on, the 4-step crescendo
alarm will sound 4 times in 5-minute intervals. The
alarm duration is 60 seconds.
When the alarm sounds, the backlight will be on for 5
seconds.
Pressing the “SNOOZE/LIGHT” key will stop the
current alarm and enter the snooze mode. Pressing the
“ALARM” key will not only stop the alarm but also turn
off the snooze function.
VIEWING THE CHANNEL
The default channel is channel 1. In normal time mode,
press the “UP” key to change the channel from 1 to 2 or 3.
HOW TO READ INDOOR AND OUTDOOR
TEMPERATURE RECORDS
Change the temperature unit to °C for Celsius or °F for
Fahrenheit by pressing the “°C/°F” key.